Unusual
phenomena |
Possible
causes |
Countermeasures |
Remarks |
No display
and power indictor light on the main unit is off |
1. Power
supply off
2. Fuse
blowout
3.
Internal Power Failure |
1. Check
and plug in the main power
2. Change
fuse
3. Please
refer to the service personal |
|
Incorrect
display on computer (Applicable for 1022A and
1022C only) |
Lose
connection of signal line to the display |
Tighten
the signal line |
|
Printer
Failure |
1. Power
supply off
2.
Lack of
ink
3.
Run out of
paper
4.
Paper
block
5.
Block of
ink |
1. Check
main power, power wire
2.
Change ink
jet
3.
Place
paper
4.
Remove
blocked paper
5. Press
¡°rinse¡±
button to wash the ink jet nozzle
|
|
Treatment
probe failure |
1. Loose
connection
2. Broken
connecting wire
3. Broken
probe |
1. Connect
the probe tightly
2. Change
connecting wire
3. Change
probe |
|